NOrdic SImulator Group

Startar denna tråd och tillsammans kan vi säkert täcka de flesta procedurerna i Ka-50. Väljer att skriva på Engelska för då kan vi eventuellt dela det med fler framöver... Påpeka gärna fel om ni hittar ;)

Quote
HMS - Head Mounted Sight
--------------------------

1. Pull down HMS [H]

2. View at target are (solid circle = within Skhval FOV, blinking circle =
  outside Skhval FOV).

3. Slew the Skhval sensor to current HMS cursor position by pressing
  uncage Skhval button [ O ]. Then fine slew as usual and lock any targets.

4. If you want to look up another area just aim with the HMS sight and
  press uncage Skhval button [ O ] again, you will see a cross in HMS sight breifly.

5. If in hover mode with auto turn ON [Q] the heli will automaticly turn the nose to
  head the new target area but it will take some time so be patience.

/KC

Quote
NoE flying using Altitude Hold Autopilot
----------------------------------------

1. Fly strait and level at desired altitude.

  Note: Don't initiate your Altitude Hold Autopilot until you've achieved
  a stable flight profile. That is, don't engage it in a hover and expect
  it to work throug your transition to foward flight, get into forward
  flight first, and then engage it.

2. Dubbel check that altitude source [LCTRL-X] is set to radar (button toggled back)
  on panel down to the right.

3. Engage Altitude Hold Autopilot (green light on left over head panel goes
  on).

4. Use the collective brake lever [F] to assign your current altitude as the
  desired altitude.

5. Try not to pitch up/down more than +/- 5 degrees to stay at desired altitude.

/KC